3-18
MS-9152 ATX Server Board
Power
Use this menu to specify your settings for Power Management. Remember that
the options available depend upon the hardware installed in your system.
PCIE LAN (PCI PME) Wake Up/Onboard 5705 LAN Wake Up (PCI32 PME)
Select [Enabled] to wake up the system when incoming signals is detected on the
specified LAN devices. Options: [Enabled], [Disabled].
PCIX PME Wake Up
When setting to [Enabled], this setting allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event). Setting
options:
[Disabled], [Enabled].
Resume On Modem Ring
Select [On] to wake up the system when an incoming call is detected on the modem.
Options: [On], [Off].
Resume On Time
Select [On] to wake up the system at predetermined time. Options: [On], [Off].
PCIE LAN (PCIE PME) Wake Up:
[Enabled]
Onboard 5705 LAN Wake Up (PCI32 PME):
[Enabled]
PCIX PME Wake Up:
[Enabled]
Resume On Modem Ring :
[Off]
Resume On Time :
[Off]
Resume Date :
[00/00/0000]
Resume Time :
[00:00:00]
After Power Failure:
[Last State]
PhoenixBIOS Setup Utility
Item Specific Help
F1 Help
↑↓
Select Item
-/+ Change Values F9 Setup Defaults
Esc Exit
↔
Select Menu
Enter Select Sub-Menu F10 Save and Exit
8
Main
Advanced
Security
Power
Boot PC Health Exit
