MSI E7230 Master Series, Руководство пользователя

Страница: 31 / 78

2-17
Hardware Setup
Fan Power Connectors: CPU_FAN1, SFAN1/2/3/4
The fan power connectors support system cooling fan with +12V. W hen connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset onboard, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
SFAN1/2
SE NS OR
+1 2V
GND
LAN LED Connectors: JACT1, JACT2
The LAN LED connectors are used to connect to LAN LEDs, which show the activity
of the LAN. JACT1 is for LAN2 jack and the JACT2 is for LAN1 jack. Both LAN1 &
LAN2 jacks are located on the back panel.
SFAN3
S E NS OR
+1 2V
GND
SFAN4
Sensor
+12V
GND
CPU_FAN1
S E NS OR
+1 2V
GND
Control
MSI Reminds You...
1. Please refer to the recommended CPU fans at Intel
®
official website
or consult the vendors for proper CPU cooling fan.
2. CPU_FAN1 supports Smart Fan control. You can install PC Alarm
utility that will automatically control the CPU fan speed according to
the actual CPU temperature. Alternatively, you may set up the smart
fan control functions in the BIOS setup utility.
Power Saving Switch Connector: JGS1
Attach a power saving switch to this connector. Press the switch once to have the
system entered the Sleep/Suspend state. Press any key to wake up the system.
JGS1
JACT1
JACT2
-
- +
+