background image

MS-6657

v

fcc-b Radio frequency Interference Statement

this  equipment  has  been  tested  and 

found  to  comply  with  the  limits  for  a 

class b digital device, pursuant to Part 

15 of the fcc Rules. these limits are 

designed to provide reasonable protec-

tion against harmful interference in a residential installation. this equipment gener-

ates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used 

in accordance with the instruction manual, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in 

a particular installation. If this equipment does cause harmful interference to radio 

or television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of the 

measures listed below:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.
consult the dealer or an experienced radio/television technician for help.

notice 1
the changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

notice 2
Shielded interface cables and ac power cord, if any, must be used in order to comply 

with the emission limits.

VoIR la notIce D’InStallatIon aVant De RaccoRDeR aU ReSeaU.

this device complies with Part 15 of the fcc Rules. operation is subject to the fol-

lowing two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that 

may cause undesired operation.

1.
2.

Micro-Star International

MS-6657

Upgrade and Warranty

Please note that certain components preinstalled in the product may be upgrad-

able  or  replaceable  by  user’s  request.  to  learn  more  about  upgrade  limitation, 

please refer to the specifications in the User’s Manual. for any further information 

about the product users purchased, please contact the local dealer. Do not attempt 

to upgrade or replace any component of the product if you are not an authorized 

dealer or service center, since it may cause the warranty void. It is strongly recom-

mended that you contact the authorized dealer or service center for any upgrade 

or replace service.

acquisition of Replaceable Parts

Please be noticed that the acquisition of replaceable parts (or compatible ones) of 

the product users purchased in certain countries or territories may be fulfilled by 

the manufacturer within 5 years at most since the product has been discontinued, 

depending on the official regulations declared at the time.
■  Please  contact  the  manufacturer  via  http://www.msicomputer.com/msi_user/

msi_rma/ for the detailed information about the acquisition of spare parts.

technical Support

If a problem arises with your system and no solution can be obtained from the 

user’s manual, please contact your place of purchase or local distributor. alterna-

tively, please try the following help resources for further guidance.

Visit the MSI website for faQ, technical guide, bIoS updates, driver updates 

and other information via http://www.msi.com/index.php?func=service
contact our technical staff via http://ocss.msi.com/

Содержание AE2220
































































Отзывы: