MSI 970A-G46 Series Скачать руководство пользователя страница 53

Страница: 53 / 78

BIOS Setup

MS-7693

Chapter 2

2-13

BIOS Setup

MS-7693

Chapter 2

tRTL

Ths tem s used to set Round Trp Latency settngs.

tXP

Ext Power Down wth DLL on to and vald command; Ext Precharge Power Down

wth DLL frzon to commands not requrng a locked DLL.

==Advanced Tmng Configuraton==

Follwng tems are used to set the read/ wrte tmngs for memory.

tRRDR

Read-Read Dfferent Rank, same DIMM.

tRRDD

Read-Read Dfferent Rank.

tWWDR

Wrte-Wrte Dfferent Rank, same DIMM.

tWWDD

Wrte-Wrte Dfferent Rank.

tRWDRDD

Read-Wrte Dfferent Ranks same or Dfferent DIMM.

tWRDRDD

Wrte-Read Dfferent Ranks same or Dfferent DIMM.

tRWSR

Read-Wrte Same Rank.

HT Lnk Speed

Ths tem allows you to set the Hyper-Transport Lnk speed. Settng to [Auto], the system

wll detect the HT lnk speed automatcally.

Adjusted HT Lnk Frequency

It shows the adjusted HT Lnk frequency. Read-only.

HT Lnk Control

Press <Enter> to enter the sub-menu.

HT Incomng/ Outgong Lnk Wdth

These tems allow you to set the Hyper-Transport Lnk wdth. Settng to [Auto], the

system wll detect the HT lnk wdth automatcally.

DRAM Voltage/ SB Voltage/ NB Voltage/ CPU Voltage/ CPU-NB Voltage

These tems are used to adjust the voltage of CPU, Memory and chpset.

Spread Spectrum

Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng

clock generator pulses.

Important

If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system

stablty and performance. But f you are plagued by EMI, select the value of Spread

Spectrum for EMI reducton.

▶

•

Содержание 970A-G46 Series















































































Результаты поиска

Содержание 970A-G46 Series

Отзывы:

Похожие инструкции для 970A-G46 Series

Бренды по названию

Популярные бренды

MSI 970A-G46 Series, Руководство пользователя

Результаты поиска

Содержание 970A-G46 Series

Отзывы:

Похожие инструкции для 970A-G46 Series

Бренды по названию

Популярные бренды