MSI 945-E - Hetis - 0 MB RAM, Руководство пользователя

Страница: 54 / 93

M S-6439 Barebone
4-10
Virus Warning
The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection.
If the function is enabled and any attempt to write data into this area is made, BIOS
will display a warning message on screen and beep.
Quick Power On Self Test
Select [Enabled] to reduce the amount of time required to run the power-on self-test
(POST). A quick POST skips certain steps. We recommend that you normally disable
quick POST. Better to find a problem during POST than lose data during your work.
First / Second / Third Boot Device
These items allow you to set the sequence of boot devices where BIOS attempts to
load the operating system.
Boot Other Device
Setting the option to [Yes] allows the system to try to boot from other devices if the
system fails to boot from the 1st/2nd/3rd boot device. Settings are: [Disabled],
[Enabled].
Boot Up NumLock Status
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
Typematic Rate Setting
When [Disabled], the following two items (Typematic Rate and Typematic Delay) are
irrelevant. Keystrokes repeat at a rate determined by the keyboard controller in your
system. When [Enabled], you can select a typematic rate and typematic delay.
Typematic Rate (Chars/Sec)
After Typematic Rate Setting is enabled, this item allows you to set the rate (characters/
second) at which the keys are accelerated.
Typematic Delay (Msec)
This item allows you to select the delay between when the key was first pressed
and when the acceleration begins.
Impor tant
Many disk diagnostic programs that access the boot sector table can
trigger the virus warning message. If you plan to run such a program, we
recommend that you first disable the virus warning.
Impor tant