MSI 945-E - Hetis - 0 MB RAM Скачать руководство пользователя страница 2

Страница: 2 / 93

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interfer ence that

may cause undesired operation.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and

found to comply with the limits for a

class B digital device, pursuant to part

15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connec the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modifications not expressly approved by the party responsible for

compliance could void the user

’

s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D

’

INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

Hetis 900

Содержание 945-E - Hetis - 0 MB RAM






























































































Результаты поиска

Содержание 945-E - Hetis - 0 MB RAM

Отзывы:

Похожие инструкции для 945-E - Hetis - 0 MB RAM

Бренды по названию

Популярные бренды

MSI 945-E - Hetis - 0 MB RAM, Руководство пользователя

Результаты поиска

Содержание 945-E - Hetis - 0 MB RAM

Отзывы:

Похожие инструкции для 945-E - Hetis - 0 MB RAM

Бренды по названию

Популярные бренды