background image

M  E  A  S  U  R  E  M  E  N  T    S  Y  S  T  E  M  S    I  N  T  E  R  N  A  T  I  O  N  A  L

Page 4    

 MSI-4300 Porta-Weigh Plus/5 Key  

  User Guide

INTRODUCTION

The Measurement Systems International Porta-Weigh Plus Crane Scale
represents a new level of technology and performance in the scale industry.
A16 bit microcontroller coupled with an alphanumeric display gives unprec-
edented versatility and programmability. Advanced power saving circuitry
provides up to 300 hours of operation between charges with the standard sealed
lead acid (SLA) battery and up to 2000 hours of operating time from the
optional “D” cell alkaline batteries. The large, backlit alphanumeric display
provides precise, unambiguous indication of operating modes such as Net and
Gross. Digital calibration simplifies scale maintenance. The single circuit
board, fully shock-mounted and marine-proof construction makes for a rugged
and reliable overhead scale.

6 Digit Weight Indication

8

 Character Message Display

Units

lb, kg, t, METRIC t

International Motion Icon

Motion Indicator

Center of Zero Icon

Low Battery Indicator

METRIC

AUTO

REMOTE

0

MOTION

+

-

"Infrared Remote On" Indicator

"Auto-Total On" Indicator

Minus Sign

SPECIFICATIONS

Accuracy:

Class III or IIIL

Operating Temperature:

14

°

 F to 140

°

 F (-10

°

 C to +60

°

 C)

Enclosure:

NEMA IV, IP66 alodined cast aluminum

Safe Overload: 200% of rated capacity
Capacities - pounds (kilograms):

500 (250)

2000 (1000)

5000 (2500)

10,000 (5000)

20,000 (10,000)

30,000 (15,000)

50,000 (25,000)

70,000 (35,000)

100,000 (50,000)

Other capacities available by special order or as dictated by standards compli-
ance. MSI has designed and manufactured crane scales up to 500 ton capacity.

Backlit, transflective LCD
provides excellent
readability from full
sunlight to total darkness.
The alphanumeric section
prompts the operator
through setup and
calibration.

Содержание 4300/5




























Отзывы: