5
WARNING
-
Please always keep the heat pump at the places that well ventilated and away from anything which could
cause fire.
- Don’t weld the pipe if there is refrigerant inside. Please keep the heat pump out of the confined space
when make gas charge.
- Please always empty the water in your heat pump during winter time or when the ambient temperature
drops below 0
℃
, or else the titanium exchanger will be damaged because of being frozen, in such case,
your warranty will be lost.
- Please always cut off the power supply, when opening cabinet of the heat pump for maintenance or
repairment.
- Please well keep the display controller in a dry area to protect it from being damaged by water or moisture.
It is not suitable to run this heat pump outside without any water prevention, at rainy days or keep it less
than 1.5 meters from your pool.
- Action of gas charge must be conducted by the professional with R32 / R410A operating license.
- It is normal if no display within 3 minutes after power on, due to the built-in protection in PCB, as it may
cause moisure from evaporator when your heat pump is heating. At this condition, wait a while and try to
plug it again.
ATTENTION:
When you open the carton box, please check if the contents are well provided, or contact your
supplier if anything missed.
Mini heat pump x 1
Hose x 2
Hose clamp x 2
Instruction of operation (service manual) x 1
In/out water connection adapter x 2 (with
Oring)
