User’s Manual
PSE-608R(I)/616R(I)/624R
26
Configuration
. In the main page window, click “Config”, and select “Setup”, the screen will show the
system control panel as below.
Set icon: Apply the operation mode to PSE system.
Set Enable/Set Disable icon: Change the Board Status window to set enable/disable.
Factory icon: Apply the factory setting to PSE system.
You can setup Operation Mode/ AC Disconnect/ DC Disconnect of each port individually,
then, click “Set”.
PSE port operates in one of three modes: auto mode, force mode and shutdown mode.
In auto mode, the port will detect and classify a PD to connect to, then immediately turn
on the power if the detection was successful. In force mode, the port will not detect and
classify a PD to connect to, but immediately turn on the power to the port. In shutdown
mode, the port is disabled and does not detect or power on a PD.
