Installing the Speaker
The steel bracket is pre-fastened to the ceiling or wall, then the speaker is placed on the bracket and secured in the following
steps (see figures 6 & 7):
a) Fasten the bracket in the desired location, making sure that it is properly and safely mounted.
b) Slide the side of the reflector opposite the screw over one end of the installed bracket.
c) While holding the screw side against the surface, tighten the screw until the speaker is resting firmly in position.
Suspended Ceiling T-Bar Mounting
Two Caddy Twist Clips and Twist Nuts are provided for connecting to suspended ceiling T-bars. Please refer to the enclosed
Caddy Clip T-bar mounting instructions for more details (also, see figure 6 above).
a) Place the clips about 8 3/4” apart on the T-bar. Check to be sure they have snapped on the bar correctly.
b) Slide them into final position to fit through the holes in the mounting bracket. Tighten the thumb nuts securely.
c) Secure the speaker per steps b and c (above), “Installing the Speaker”.
