5
2.
Check all speaker wires and cables for loose connections.
3.
Check to see if you have selected the proper source on your amplifier.
VOICES DO NOT APPEAR TO COME FROM BETWEEN THE SPEAKERS / BASS RESPONSE IS WEAK
1.
Verify that all speaker connections from the amplifier to the speakers are running PLUS+ to PLUS+ and MINUS- to MINUS-.
2.
Check to see if there are any furnishings or plants that may be blocking the output of a speaker.
SOUND, BUT NO BASS (MOST LIKELY IN SYSTEMS WITH A SUBWOOFER)
1.
Verify that the subwoofer is plugged into an AC outlet and power is turned on.
2.
Check that the speaker wire / cable going from the amplifier/receiver to the subwoofer is securely fastened.
3.
Check the volume control of the subwoofer.
4.
Refer to your amplifier/receiver manual to make sure you have adjusted its bass output properly.
MUDDY OR BOOMY BASS
1.
Check the volume control for the subwoofer. Excess volume can cause speakers to sound distorted and unnatural.
2.
Try adjusting the crossover control on the subwoofer or the subwoofer setup on your receiver to a slightly lower frequency.
3.
If the subwoofer or full size speaker is close to a corner, side or back wall, try moving it away from the wall.
4.
Bookshelf speakers placed in a semi-enclosed space or cabinet can artificially emphasize bass output. Reduce the bass control on
your amplifier or move the speakers to the front of the cabinet. Alternatively, reposition the speakers to a more open location.
DISTORTED SOUND FROM THE SPEAKERS
1.
This problem is usually caused by setting the volume control too high. Reduce the amplifier/receiver volume to a lower level.
2.
If noise and distortion are audible at higher volume levels, your amplifier may not be powerful enough. Consider upgrading to a unit
with higher power.
NOTE: Remember, even though your Phase Technology speakers can handle considerable power levels, ANY speaker if used improperly can be damaged.
Consult your Phase Technology dealer for assistance in choosing a new amplifier or receiver.
[WARRANTY]
LIMITED WARRANTY
:
Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10) years
for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original purchaser. Purchase must be made
from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs, failure
to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be
brought to the attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been altered or removed.
Should your Phase Technology product require service, please call the MSE Audio customer service department for a return authorization. All merchandise
returned to Phase Technology without prior authorization will be refused. For your return authorization number, please call 855.663.5600 or email sales@
[SPECIFICATIONS]
3” Compact, Full-Range In-Wall w/ Integrated Metal Backcan & Bypassable
25/70.7/100 Volt Transformer
8Ω
85.5 dB
115 Hz - 22 kHz
5 - 60 Watts
N/A
N/A
3” Polypropylene w/ NBR Surround
Hardwire Lead
White ABS/ Aluminum (paintable)
5” H x 5” W x 4.125” D
4.35” H x 4.35” W
3.1 lbs
Tile Bridge, Conduit Connector, Paint Mask, Wire Nuts
Pre-Construction Bracket (AC-CI15-PCB)
Description:
Nominal Impedance:
Sensitivity:
Frequency Response:
Recommended Power:
Tweeter(s):
Midrange:
Woofer(s):
Inputs:
Grille:
Dimensions:
Cutout Dimensions:
Weight:
Included Accessories:
Optional Accessories:
CI15
Copyright © 2016 MS Electronics, LLC. All rights reserved. MSE Audio, Phase Technology and PhaseTech are registered trademarks and
“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio
®
. www.phasetech.com.
