MSC IPC370T, Руководство по эксплуатации

Страница: 15 / 42

OI: IPC370T Installation and Configuration
Rev. 1.00 dated 1.7.2004 Page 11 of 38
2.1.3 Onboard IDE disk configuration
82443BX
Fig. 2-3: Onboard IDE disk configuration
With the aid of the isolated jumper (2 pin) an ATA100 cable can be simulated to the
Primary IDE Interface.
No ATA100 cable
ATA100 cable
The jumper field (4 pin) is used to configure the hard disk which can be attached on the board
directly (Primary IDE interface). The corresponding assignment of the individual contacts is
illustrated on the following picture.
1
2
43
44
1
2
3
4