MSC Technologies COM Express MSC C10-MB-EV, Руководство пользователя

Страница: 31 / 42

MSC C10-MB-EV User Manual
31 / 42
4.13 GPIO
The COM Express module provides four general purpose outputs and four general purpose
inputs. They are shared with the SD Memory Card signals.
The GPIs have pull-up resistors and are routed to a DIP switch (S2805). With the DIP
switch the GPIs can be connected to ground. The assignment GPI
– switch is printed on the
PCB.
The GPOs are connected to LEDs for optically status display.
4.13.1 GPIO Connector
Don’t set jumper J3001 to use the GPI signals at X3001. (Default)
Specification:

References: X3001

Connector: 10 pin header, 2.54mm

Pin-out: Refer to Table 17