MSC Technologies COM Express MSC C10-MB-EV, Руководство пользователя

Страница: 22 / 42

MSC C10-MB-EV User Manual
22 / 42
Pin Signal name Function
1 LVDS_A0- LVDS Negative data signal (-)
2 LVDS Positive data signal (+)
3 LVDS_A1- LVDS Negative data signal (-)
4 LVDS Positive data signal (+)
5 LVDS_A2- LVDS Negative data signal (-)
6 LVDS Positive data signal (+)
7 VSS Ground
8 LVDS_A_CK- LVDS Negative clock signal (-)
9 LV LVDS Positive clock signal (+)
10 LVDS_A3- LVDS Negative data signal (-)
11 LVDS Positive data signal (+)
12 LVDS_B0- LVDS Negative data signal (-)
13 LVDS Positive data signal (+)
14 VSS Ground
15 LVDS_B1- LVDS Negative data signal (-)
16 LVDS Positive data signal (+)
17 VSS Ground
18 LVDS_B2- LVDS Negative data signal (-)
19 LVDS Positive data signal (+)
20 LVDS_B_CK- LVDS Negative clock signal (-)
21 LV LVDS Positive clock signal (+)
22 LVDS_B3- LVDS Negative data signal (-)
23 LVDS Positive data signal (+)
24 GND Ground
25 LVDS I2C DAT I²C Data
26 VDD EN Display power enable signal
27 LVDS I2C CK I²C Clock
28 VCC LCDSW 3)
Switched Power Supply
(Voltage depend on JP1701)
29 VCC LCDSW 3)
Switched Power Supply
(Voltage depend on JP1701)
30 VCC LCDSW 3)
Switched Power Supply
(Voltage depend on JP1701)
Table 5 Pin-out JILI30 LVDS-Interface
3) Note: The power at 12V PCIe, VCC_LCD (X1601), VCC_BL_EDP (X1602), VCC_BL (X1101)
and 12V fan power are switched off, when the power input is not in the range of 11V to 13V. In
that case, you can feed 12V from an external power source at X1603 pin 4 to supply these
connectors with power.
4.7.1 LVDS EEPROM Socket
A serial EEPROM is connected to the signals LVDS_I2C_CK and LVDS_I2C_DAT to store
configuration data of the LCD.
This EEPROM can be assembled optionally or it can be disabled with a closed DIP-Switch
S2804 #4 to avoid conflicts with configuration EEPROM connected via the JILI connector.