MSB Technology The Discrete DAC, Руководство пользователя

Страница: 4 / 17

Setup and Quick Start
The interface is quite simple with few user controls. Input source
defaults to auto switching. The display will let you know if you have
an active input. On power up, the volume is reset to the programmed
startup level. Shipping default is 70. Turn the volume knob up until
you hear music.
Power The DAC comes with a high performance Power Supply.
The power supply can be switched between 240V and
120V. This is not a switching supply that works at any
voltage. The power supply is switched on and off with
a button on the back. The LED in the back of the power
supply indicates green when ON. Always allow three to
five hours for the DAC to warm up and reach optimal
operating temperature.
Inputs The DAC comes with the digital input modules of your
choice. Connect any digital input to any active digital
audio source. The frequency and bit depth of the
incoming signal will be displayed on the front panel.
Outputs Connect the balanced analog outputs to any amplifier.
The output level is controlled with the knob or remote.
When stacking the units, you will find enclosed black plastic square
inserts. These inserts fit into the square holes in the top of each
chassis. This will allow you to stack the units without scratching the
chassis.
Burn-In
The feedback we receive leads us to recommend at least 100 hours
of burn-in on this DAC. Customers generally report improvement up
to one month.