MSB Technology The Discrete DAC Скачать руководство пользователя страница 17

The Discrete DAC Limited Warranty

Warranty includes:
• MSB warrantys the unit against defects in materials and work

-

manship for a period of 

1 year

 from the date the unit was originally 

shipped from MSB.
• This warranty covers parts and labor only, it does not cover shipping 

charges or tax/duty. During the Warranty period, there will normally 

be no charge for parts or labor.
•  During  the  warranty  period,  MSB  will  repair  or,  at  our  discretion, 

replace a faulty product. 
•  Warranty  repairs  must  be  carried  out  by  MSB  or  our  authorized 

dealer. Please contact your dealer if your unit requires service.

Warranty excludes:
• The Warranty does not cover standard wear and tear.  
• The product is misused in any way.
• Any unauthorized modifications or repairs were performed.
• The product is not used in accordance with the Operating Cond

itions 

stated below.
• The product is serviced or repaired by someone other than MSB or a 

authorized dealers.
• The product is operated without a mains earth (or ground) connection.
• The unit is returned inadequately packed.
•  MSB  reserves  the  right  to  apply  a  service  charge  if  the  product 

returned for warranty repair is found to be operating correctly, or if 

the product is returned without a returns number (RMA) being issued. 

 Operating Conditions:
• Ambient temperature range: 32F to 90F, non-condensing.
• The supply voltage must remain within the AC voltage specified on 

the power base. 
• Do not install the unit near heat sources such as radiators, air ducts, 

power  amplifiers  or  in  direct  strong  sunlight.  This  may  cause  the 

product to overheat.

Содержание The Discrete DAC


















Отзывы: