(3)
Install device at the desired space.
When installing the device on a solid plain surface, use four appropriate
screws and apply a torque of 5 Nm (3 ft-lbf) .
(4)
Close housing lid by tightening the lid screws with a torque of 1.5 Nm (1 ft-lbf).
(5)
Close right joints.
(6)
Optional:
Loosen grounding clamp.
a) Insert grounding cable and re-tighten grounding clamp with a torque of 2 Nm
(1.5 ft-lbf) .
(7)
If needed, plug in and screw Ethernet plug with a torque of 0.4 Nm (0.3 ft-lbf).
(8)
Plug in power plug and screw union nut with a torque of 1.2 - 1.5 Nm (0.9 - 1 ft-
lbf) using a wrench SW14.
The device is assembled.
MSA HUB
11
GB
3 Assembly and Installation