background image

USER INSTRUCTIONS 

 LYNX TRIPOD 

Page 7

Copyright © 2002, MSA 

P/N 10022053

4.2 TYPICAL 

APPLICATIONS:

The fi gures in this section show confi gurations of optional accessories and typical applications of these 
systems.

4.3 

USAGE LIMITATIONS:  

The following applications limitations must be considered and planned for before using the Lynx Tripod.

4.3.1 

PHYSICAL LIMITATIONS:  

The Lynx Tripod is designed for use by one person with a combined total weight no greater than 310 lbs (140 
kg), including clothing, tools, and other user-borne objects; or in lifting or lowering materials with a combined 
total weight of no greater than 620 lbs (280 kg).  Persons with muscular, skeletal, or other physical disorders 
should consult a physician before using a personal fall arrest system that includes a Lynx Tripod.  Pregnant 
women and minors must never use these systems.  Increasing age and lowered physical fi tness may reduce 
a person’s ability to withstand shock loads during fall arrest or prolonged suspension.  Consult a physician if 
there is any question about physical ability to safely use this product to arrest a fall or suspend.  

Fall-Rescue  Work Sys-
tem (FRWS) using Side-
Mount Lynx Hoist to lower 
material.  Worker attached 
to Lynx Rescuer for fall 
arrest and emergency 
retrieval.

FRWS using Lynx Res-
cuer for fall arrest and 
emergency retrieval.

FRWS showing Side-Mount Lynx 
Hoist to raise and lower worker on 
suspension seat.  Lynx Rescuer for 
fall arrest and emergency retrieval.

F R W S   s h o w i n g   Ly n x 
Rescuer and Y-retrieval 
Lanyard used for emer-
gency retrieval.

!    WARNING

Do not alter this equipment or intentionally misuse it.

Содержание FALL-RESCUE 10022050

























Отзывы: