Remote Alarm units
AU-106, AU-206
11
2
INTENDED USE OF THE PRODUCT
2.1
O
PERATIONAL CONSTRAINTS
The Product’s installation is provided in compliance with its outline and connec-
tion dimensions.
Caution!
Distance between the installation site and magnetic compass shall
not be less than 1 m!
Select the installation site in compliance with operational constraints (operating
temperature and protection degree – IP).
Connect the Product to power mains in compliance with input voltage require-
ments.
2.2
U
SAGE PREPARATIONS
2.2.1
Safety features
While preparing the Product for operation, check it visually after unpacking; me-
chanical damage shall be absent.
Connection to power mains shall be provided only in compliance with input
power requirements.
Before connecting the Product shall be switched off and have a proper grounding.
While using the Product the staff shall follow “The technical rules for operation
of electric installation” and “Safety rules for operation of electric installation” while test-
ing electrical circuits and insulation resistance.
2.2.2
Visual check procedure
Before switching the Product on, a user shall:
– observe visually the cable integrity and initial position of the controls on the
Product’s casing;
– check the absence of dust and dirt on the Product casing; clean with a soft cloth
if necessary;
– check that cable connectors are securely connected to the Product.
2.2.3
Switching on instructions
While connecting the Product and preparing it for operation follow the steps be-
low:
Содержание AU-106
Страница 2: ......
