MSA APOGEE P1 Скачать руководство пользователя страница 1

ZGARD S & DS 
(APOGEE P1) Gas Sensors 

Instruction Manual 

THIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE
RESPONSIBILITY FOR USING OR SERVICING THE PRODUCT. Like any piece of complex equipment,
this instrument will perform as designed only if it is used and serviced in accordance with the manu-
facturer’s instructions. OTHERWISE, IT COULD FAIL TO PERFORM AS DESIGNED AND PERSONS
WHO RELY ON THIS PRODUCT FOR THEIR SAFETY COULD SUSTAIN SEVERE PERSONAL INJURY
OR DEATH.

The warranties made by Mine Safety Appliances Company with respect to the product are voided if
the product is not used and serviced in accordance with the instructions in this manual. Please pro-
tect yourself and others by following them. We encourage our customers to write or call regarding this
equipment prior to use or for any additional information relative to use or service.

Manuel d’instructions

Veuillez lire attentivement les instructions qui suivent.  Tous ceux qui sont responsables, ou qui
aurons la responsabilité pour l’installation, la fonctionnalité ou l’usage de ce produit doivent se famil-
iariser complètement avec ses instructions. Comme tout appareil complexifié, ce produit peut vous
donner les résultats anticipés seulement s’il est installé, usagé et que le service d’entretien sont effec-
tués d’après les instructions du fabricant (ou manufacturier). Sous peine de ne pas suivre les instruc-
tions ci-incluses, il est possible que cet appareil vous donne des résultats insuffisant. En con-
séquence, les personnes qui dépendront sur ce produit pour leur sécurité peuvent être blessés ou
mourir.

Les garanties de ‘Mine Safety Appliances Company’ par rapport à ces produits sont annulés si les pro-
duits ne sont pas installés, usagés et le service maintenus conformément aux instructions ci-inclus-
es. Veuillez vous protéger ainsi que les autres, en suivant les instructions d’installations. S’il vous
plaît, entrez en communications avec nous au sujet de ce produit avant l’utilisation de ce produit ou
pour plus amples renseignements, sois pour l’usage ou les réparations.

In North America., to contact your nearest stocking location, dial toll-free 1-800-MSA-INST

To contact MSA International, dial (724) 776-8626

© MINE SAFETY APPLIANCES COMPANY 201

4

 - All Rights Reserved

 

This manual is available on the internet at www.MSAsafety.com

Manufactured by

MSA NORTH AMERICA

1000 Cranberry Woods Drive, Cranberry Township, PA 160660

(L) Rev 2  

10070975

"!

Détecteur d’Émanations

"!

WARNING

Содержание APOGEE P1

















Отзывы: