ACCESSORIES
3. Once the canister is
attached, align the feet
of the spark cover with
the inlet hole of the
canister.
4. Grasp the outside of
the canister, twist and
push on the spark
cover. The spark cover
will snap in place.
5. To remove the spark cover, gently squeeze the outside
of the cover, twist, and pull the spark cover off.
6. Check the spark cover before each use to ensure no
sparks have created holes or warped the part. If holes
are created or the part is warped, replace the spark
cover with a new one.
29
TAL 803 (L) Rev. 0 - 10086002
motion for attaching
spark cover
check for spark
arresting material
Spark Arresting
Material
Содержание 10086004
