manualshive.com logo in svg

MS INTELLI 3, Руководство пользователя, Страница: 18 / 20

Поделиться
Скачать
MS INTELLI 3 Скачать руководство пользователя страница 18

Battery Charger INTELLI 3

17

DECLARATION OF CONFORMITY

M+S Solution GmbH hereby declares that the battery charger INTELLI 3 (Type: V1.0) fulfi ls 

the following standards: 
•   EN60335-1:2002 + A1:2004 + A11:2004 + A2:2006 + A12:2006 + A13:2008 + 

A14:2010 + A15:2011;

•   EN60335-2-29:2004 + A2:2010 in accordance with the conditions in the Directive 

2006/95/EG (Low-voltage Directive)

•   EN61000-3-3, EN61000-3-2, EN55014-1, EN55014-2 in accordance with the condi-

tions in the Directive 2004/108/EG (Electromagnetic compatibility) 

SERVICE ADDRESS / IMPRINT

Service-Adress:

M+S Solution GmbH

You can fi nd the latest address and telephone number at http://www.m-u-s.com 

The website also contains this operating manual as a download in colour or in other 
languages, as well as accessories and other interesting products on the theme of battery 
charging and protecting vehicles.

Impressum

© 2014 M+S Solution GmbH
We reserve the right to make technical and visual changes and correct printing errors 
(14. August 2014).

Содержание INTELLI 3





















Отзывы:

Нет отзывов