4
General
These fully stainless steel MS Greenline mini/ST-168 injectors provide the option of enabling two larger cross-
sections in order to guarantee virtually no pressure drop in flush mode. This makes it possible when using large
volumes of water to leave the injector permanently on the high pressure line without adversely affecting cleaning
performance in cleaning and flush modes. A selector enables switching between injector and flush mode,
whereby two holes duct the water parallel to the injector (bypass operation) and injector operation, where the
volume of water available is ducted through the injection area.
With the MS Greenline mini chemicals can be drawn in when used in combination with a foam lance such as for
example the ST-72, ST-74 or ST-75 or a surge regulator ST-51 or multi-regulator nozzle and be sprayed or
foamed using the nozzle selected.
The injector operates with a maximum inlet pressure of 350 bar and due to the use of high-quality materials can
be used at temperatures up to 100 °C. Throughput direction is indicated with arrows to ensure ease of installation.
General safety notes
▪ To guarantee safe operation the bypass injector may only be used in accordance with these Operating
Instructions.
▪ Keep these Operating Instructions in a safe place for later reference.
▪ Please also observe the safety instructions for the detergent and if applicable of the high pressure cleaner
manufacturer.
▪ Do not mix detergents one with the other.
▪ Wear suitable protective clothing and gloves when working.
▪ Never direct the high-pressure jet at persons or other living creatures.
▪ Read the safety data sheets and observe the corresponding safety and handling regulations.
In addition the required safety and legal regulations for the respective type of use must be observed. This
also
applies to all accessories used.
