MS ENERGY eBike c500, Инструкция по эксплуатации

Страница: 394 / 424

ENG
29
4.Frame and Fork
‐ Check that the frame and fork are not bent or broken.
‐ If either are bent or broken,they should be replaced.
5.Chain
‐ Ensure chain is oiled, clean and runs smoothly.
‐ Please go to the qualified technician for adjusting the correct chain tension
‐ Extra care is required in wet or dusty conditions.
7.Bearings
‐ Ensure all bearings are lubricated, run freely and display no excess
movement, grinding or ratting.
‐ Check headset, wheel bearing, pedal bearings and bottom bracket bearings.
8.Cranks and pedals
‐ Ensure pedals are securely tightened to the cranks.
‐ Ensure cranks are securely tightened to the axle and are not bent.
9.Derailleurs
‐ Check that front rear mechanisms are adjusted and function properly.
‐ Ensure control levers are securely attached
‐ Ensure derailleurs, shift levers and control cables are properly lubricated
10.Accessories
‐ Ensure that all reflectors are properly fitted and not obscured
‐ Ensure all other fittings on the bike are properly and securely fastened,and
functioning.
‐ Ensure the rider is wearing a helmet
IMPORTANT : if this safety procedure is too diffcult for you, it is
better to contact one of our technical workshops to carry out this
type of procedure.
Maintenance
In order to ensure traffic safety, from time to time, check whether all the
electrical appliances work properly, whether there is any lost wire and whether
mechanical parts are normal, and clean, wipe, oil the chain, fluted disc, flywheel
and Derailleur regularly (consult your supplier for the model of the oil product)
so as to maintain the normal function of each part at any time.
Warning!
Don not over lubricate. If oil gets on the wheel rims or the brake shoes, it will
reduce brake performance and a long distance to stop the bicycle will be
necessary. Injury to the rider or to others can occur