MS ENERGY C-Vibe, Инструкция по эксплуатации

Страница: 255 / 264

ENG
41
CAUTION
CAUTION
•
Do not use acid-based cleaners. If such funds used for stubborn stains,
so use this only occasionally, dry it immediately after and then apply a
corrosion protection spray.
•
Always follow the manufacturer
‘
s instructions on care and cleaning
agents.
•
Use best only water and mild detergent or special cleaner from the
dealer to the sensitive components of the vehicle to prevent damage. Dry
the plastic parts then wipe with a soft, dry cloth or sponge.
•
Protect particularly plastic parts, paint, headlight glass from harsh
chemicals such as fuel, rust remover, brake cleaner or similar. The use of
such agents may result in malfunction, damage and affect the security
itself.
•
Do not use a high pressure washer or steam cleaner, causing water in
storage can penetrate electrical components such as connectors or
switches, lighting, brake shoes and brake linings or damage, seals, paint
and other surfaces.
Cleaning after normal use
Remove dirt with warm water, a mild detergent, and a soft, clean sponge,
and then rinse thoroughly with clean water. Use a brush for hard-to-reach
areas.
Cleaning after riding in the rain, near the sea or on salt-sprayed roads
Since sea salt or salt sprayed on the roads during winter are extremely
corrosive in combination with water, carry out the following steps after
each ride.
•
Clean the vehicle with water and a mild detergent.
•
Do not use hot water, which increases the corrosive effect of the salt.
•
Apply a corrosion protection spray on all metal, including chrome and
nickel-plated, surfaces to prevent corrosion.