USER MANUAL
OPTIMA 7
27 / 78
MRU GmbH, D-74172 Neckarsulm
Setting CO limit value
High CO concentrations in the gas stream can shorten the life span of
your CO sensor. The analyzer can warn the user if the analyzer exceeds a
pre-defined CO limit.
►
Select Gas measurements.
►
Press OK.
The menu Selection meas. program appears.
►
Select the desired measuring program from which the CO limit value
is to be set
►
Press F1.
The menu CO-Limit appears.
►
Set the desired CO-limit [ppm].
►
Press OK
The desired CO-limit [ppm] is stored.
Select fuel types and O2 reference
NOTE
Note that you can only set the fuel type selection and
O2 reference if the combustion calculation has been
switched on.
See also Chapter 5.3 Setting measurement, Page
20.
Whenever a measuring program for flue gas measurement is called, a
fuel can be selected from a list. Which fuel is available can be selected
from a maximum fuel type list.
Adding fuels to fuel type selection
