MRMC MRMC-2118-00, Быстрый старт

Страница: 10 / 36

Round Rail Quick Start Guide
6
7. Put the drop-in anchor insert,
threads upward, through the sleeve
and into the hole in the concrete, all
the way to the bottom.
8. Insert the anchor spreader tool into
the drop-in anchor insert.
9. Hit the top of the anchor spreader
tool with a hammer until the anchor
is fully spread in the concrete,
being
careful not to hit the track .
10. Remove the anchor spreader tool.
11. With the sleeve still finger-tight
against the floor, insert the retaining
bolt through the sleeve and into the
drop-in anchor insert, and tighten.
12. Repeat steps 2 to 11 for the other three anchor brackets on the track
section.
7
Anchor
spreader
tool
Drop-in
anchor
insert
8
9
11