Robotic Pod Quick Start Guide
26
Reset Robot
Clicking
Reset Robot
resets the axes (Hex) board in the head. Use this
option when the camera has crashed/frozen or a power cycle is required.
Reset Camera
Clicking
Reset Camera
resets the Nikon camera as-though you
power-cycled it.
Remote Direct Toggle
Checking this option resets the camera to be connected to the PC via
USB. This is useful when you want to transfer images to the PC via USB
or use certain options in the
Robot Settings
>
Colour
page. (Other
names for Remote Direct are USB Direct or USBtoIP.)
Important
If you have enabled Remote Direct connection, ensure that you turn
it off after you have finished using it. If left on for too long, you
might need to reset head to reconnect.
Reset 10-Pin
Clicking
Reset 10-Pin
reinitialises the 10-Pin board.
Change Network Quality
Clicking/tapping this option gives you a message with instructions on
how to change the resolution of the imagery from the REP camera. You
might need to do this if your bandwidth is limited and you want to reduce
the traffic on the network.
Содержание MRMC-1464-01
