RelayDoc User Manual
Page 6
Version 1.25
Filename: RelayDoc User Manual v1.25.docx
© MRD Rail Technologies Pty Ltd
14Sep2017
COMMERCIAL IN CONFIDENCE ©2016 MRD RAIL TECHNOLOGIES PTY LTD WWW.MRD.COM.AU +61 7 3821 5151
S
ETUP OPTIONS
Prior to use, the operator/installer must consider the following setup options
Item
Comment
Permanent installation
Four holes are for wall or panel mounting. What hardware will be required?
Default Test Process
What is the most commonly used or standard process?
IP address required
Static or Dynamic? The RelayDoc defaults to a dynamic IP address
Time Zone, Time and Date
Where is the unit to be used?
Interface Language
What language will the operator use?
PIN
A PIN is required to access on-device settings
User ID and Password
One named user can access the web-server settings
Company Logo
A company logo can be added to the Web-server Pages and Test Reports
F
EATURES
*For Clarity, Power Cable has been electronically removed from image
Feature
Benefit
Full colour, backlit, 5” touch screen Easy to use controls
Easy navigation
On-device Report viewing
Audible alerts
Event alerts following lengthy test processes
Network connected
Simple connection to a local network using Ethernet
Built-in web server
Remote viewing of on-device reports
Data downloads to remote databases
Access to advanced device settings
12-24vdc Input Power
Easily connect to any mains supply using a suitable power supply unit
Wall mountable
Easy to permanently install
1R Test Base
Power Switch
Calibration Label
USB-B Port
Ethernet Port
Factory Reset Switch
DB19 Female
Power Input*
Serial Number
Touch Screen
Relay Base
Screw Cover