Operation Of Buttons
Page 4
mrcool.com
AHU Remote Controller
3
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
Buttons and Functions
NOTE: Some of the buttons on the remote controller may have labels for features that are not available
on the unit it is being used on. However, these buttons may be used to activate other features. Please
refer to the How to Use Basic Functions and How to Use Advanced Functions sections of this manual for
more information.
ON/OFF
Turns the unit on or off.
SET
°C/°F
SLEEP
LED
FAN SPEED
TIMER ON
Increases temperature in
1°F (1°C) increments.
Maximum Temperature
setting is 86°F (30°C).
Scrolls through operation
functions in following
sequence:
Follow Me
( )
AP Mode ( )
The selected symbol will
flash on the display window,
press the
OK
button to
confirm.
Decreases temperature
in 1°F (1°C) increments
Minimum temperature
setting is 60°F (16°C).
TEMP
TEMP
Sets the timer to turn the unit on
(see
How To Use Basic Functions
section for further instructions).
Selects fan speeds in the
following sequence:
AUTO LOW MED HIGH
Not available on this model.
This function allows the temperature
display to switch between Celsius and
Fahrenheit temperature readings.
Saves energy during sleeping hours.
OK
Used to confirm the selected functions.
Swing
Not available on this model.
TIMER OFF
Sets the timer to turn the unit off
(see
How to Use Basic Functions
section for further instructions).
MODE
Scrolls through operation modes in
the following sequence:
AUTO COOL DRY HEAT FAN
NOTE: HEAT mode is not supported
by the cooling-only version. Please
do not select HEAT mode if the unit
is a cooling-only version.
SHORTCUT
Used to restore the current settings or
resume previous settings.