How To Use Advanced Functions
Page 9
mrcool.com
How to Use Advanced Functions
SHORTCUT function
Press the
SHORTCUT
button (some units) to revert to previous settings:
Press the
°C/°F
button (some units) to alternate the temperature display
between Celsius and Fahrenheit.
Pressing the
SHORTCUT
button when the remote controller is on will cause
the system to automatically revert back to the previous settings including the
operating mode, set temperature, fan speed level, and the sleep feature
(if activated).
If the
SHORTCUT
button is pressed for more than 2 seconds, the system will
automatically restore the current operation settings including the operating
mode, set temperature, fan speed level and sleep feature (if activated).
The
SLEEP
function is used to decrease the energy of the unit while you sleep.
(The same temperature settings are not needed to stay comfortable while
sleeping.) This function can only be activated by the remote control.
For further details on the
SLEEP
function please refer to the User’s Manual.
°C/°F (some models)
LOCK function
SLEEP function
5s
5s
+
Follow
Me
or
Press
LED
button and
°C/°F
button
(
Follow Me
button on some models) at
the same time for 5 seconds or more to
activate the
LOCK
function. None of the
buttons will respond when this function
is activated. Pressing the buttons
together again for a duration of two
seconds will disable the
LOCK
function.
Press the
SLEEP
button to activate the sleep function:
NOTE: The SLEEP function is not available in FAN or DRY mode.
5s