2. TYPICAL APPLICATION
* Measure pneumatic pressures.
* Measure automobile engine pressures.
* Pressure for super heat measurements.
* Hydraulic servo controls.
* Refrigeration.
* Air conditioning.
* Food processing.
3. SPECIFICATIONS
3-1 General Specifications
Circuit
Microprocessor LSI circuit.
Display
61 mm x 34 mm supper large LCD display.
15 mm ( 0.6" ) digit size.
Sensor type
Can cooperate with optional 2, 5, 10, 20, 50,
100, 200, 400 bar sensor, new calibration are
not necessary when change the new sensor .
Display units
Bar, Psi, Kg/cm 2 mm/Hg, inch/Hg,
meter/HF2 , inch/HF2 , Atmosphere.
Accuracy
( 0.5% + 1 d )
* Under the signal from the sensor is at full
scale ( 100 mV ).
* Meter only.
* Within 23
蚓
5
蚓
Pressure
Cooperate the external pressure sensor that
sensor
its output signal is 100 mV for full scale.
ref. page 16
Zero adjust
Push button on the front panel.
Span adjust
Push button gain adjustment, usage for
calibration precisely if necessary.
Input signal
DC 100 mV for full Scale.
from sensor
2