* With the " REC " symbol on the display :
(a) Push the " Max./Min. Button " ( 4-4, Fig. 1 )
once, the " Max " symbol along with the maximum
value will appear on the display.
(b) Push the " Max./Min. Button " again, the " Min "
symbol along with the minimum value will appear
on the display.
(c) To exit the memory record function, push the
" Max./Min. " button continuously at least 2 seconds.
The display will revert back to the current reading.
10 ) For quick measurement, follow the procedures
shown below :
Main procedures :
Connect the " Sensor Plug " to the meter's " Input Socket ".
Power on the meter & select the display unit.
Zero the meter by push the " Zero Button ".
Connect the pressure sensor connector to the measuring
installation
Apply the pressure, meter will display the pressure value.
Optional measuring procedures :
DATA HOLD
MEMORY RECORD
RS232 OUTPUT
Max., Min.
9