Figure 3: Device and cable configuration
6. Connection of power supply
The power for the camera is transmitted via the camera connector cable. Therefore, the power
supply is connected to the filter box (see figure 4). The required power values are 200 mA, 6-12V.
Figure 4: Filter box (rear side)
7. Connection to TV set / VCR / frame grabber
A BNC/Cinch adapter and a standard Cinch cable are used to transfer the video output signal to a
TV set, VCR, frame grabber, or video card. The Cinch cable is plugged to the video connector at
the filter box (see figure 4).
The video signal can be directly viewed with a TV or recorded with a VCR. To view and store the
images with a PC, the Cinch cable must be connected to a frame grabber or video card within the
PC. Any software for analog video viewing should be appropriate to process the signals.
MRC Systems GmbH
version: 6 - 2010-12-03
page 4 of 6
power
supply
video
connector
