Instruction Manual for Microprocessor Centrifuge
MDCEN-302-SMD
(DC brushless motor)
Warnings:
* Do not open the lid before the centrifuge stops completely.
* Do not remove the centrifuge during operation.
* Do not put objects on the top of the lid.
* Do not disassemble the centrifuge by yourself. In the event of a malfunction, the centrifuge should be
repaired by a qualified technician. Before repairing, turn off the power.
Steps:
1. Place the centrifuge on a flat surface. Plug the centrifuge into a properly grounded outlet. Turn on the
main power switch on the right side of the centrifuge.
2. Push the button , and then the screen is illuminated. Press the button to open the lid. The
icon is flash on the screen. Insert an even number of tubes in a symmetrical position into the
rotor.
3. Put down and press down the lid. Make sure the lid is closed well. The icon will disappear on the
screen.
4. Push the button , the speed value is flash one the screen. Push the button or to set
the speed value. Push the button
or any other function button to enter the speed value.
5. If you want to set RCF value instead of setting Speed value, please push the button
and then push
Emergency device
Main power switch
Lid
Emergency bar
