MRC IOW-924 Скачать руководство пользователя страница 10

long press> 2 SEC. By OFF to ON (eg SCREEN4-8-6 ), while the
unit's OUTPUT DISPLAY Its O1 or O2 will be blinking
(eg SCREEN4-8-10).

2)  TIME RELAY1 OR RELAY2 ON/OFF CONTROL:

When RELAY 1 or RELAY 2 is OFF (SCREEN4-8-3 of 

STEP6), CONTROL MODE to MANUAL state (SCREEN4-8-3 of 
STEP7). In this case, press CONTROL MODE BUTTON Long press
> 3 SEC. Then becomes tIME state and RELAY1 or RELAY2 ON 
time, will be based on RELAY1 or RELAY2 TIME set time to control.

* EXT:

 A.The RELAY1 or RELAY2 Time Set 5 SEC. (SCREEN4-8-4).
 B. Press RELAY 1 or RELAY CONTROL MODE BUTTON> 

3 SEC.(SCREEN 4-8-3 of STEP7).

 C. Press RELAY1 or RELAY2 ON / OFF BUTTON> 2 SEC. 

(SCREEN4-8-3 of STEP5) is RELAY1 or RELAY2 becomes 
ON, and the machine of its OUTPUT O1 or O2 will be blinking 
(eg SCREEN4-8-10), 5 SEC. after RELAY1 or RELAY2  
automatically turns OFF, and OUTPUT of this unit becomes 
their O1 orO2 stationary state.

2-4-3.INPUT STATUS:

1)  INPUT1 OR INPUT2 DETECT ON(SCREEN4-8-3 of STEP8):

When the unit of INPUT1 or INPUT 2 terminal first short circuit,

the machine will be made of INPUT1 or INPUT2 LOW becomes
HIGH (eg SCREEN4-8-11 and SCREEN4-8-12),while IO APP 
INPUT1 or INPUT2 symbol lights up (such as SCREEN4-8-7).

2)  INPUT1 OR INPUT2 PULSE LOW:

According to the NO.1, when INPUT1 or INPUT2 Terminal of

 this machine becomes open again by a short circuit, the machine 
will display the INPUT1 or INPUT2 LOW PULSE (eg SCREEN
4-8-13), and IO APP INPUT1 or INPUT2 symbol darken

And PULSE symbol lights up (such as SCREEN4-8-8).

3)  INPUT1 OR INPUT2 PULSE HIGH:

According to the NO.2, when the native of INPUT1 or INPUT2

terminal becomes open again by the short circuit, the machine will

display the INPUT1 or INPUT2 HIGH PULSE
(eg SCREEN4-8-14), and IO APP INPUT1 or INPUT2 and 
PULSE symbol lights up(such as SCREEN4-8-9).

8

Содержание IOW-924



















Отзывы: