MRC INE-DDBJ-350F, Инструкция по эксплуатации

Страница: 25 / 31

2.7.7 Start measurement
After all of the above operation is completed, click on "Next" to start formal
measurement, display as shown in figure 19.
Measurement Display Diagram (Figure 19)
In the figure, above is the measurement window, also shows the results of
the measuring parameters and measuring results of related auxiliary
parameters.
In the figure, below is the last time conductive probe calibration results, when the
measurement is finished, it shows the result.
The meter automatically measures values, calculates and displays the
results according to the set measurement parameters and reading methods.
The meter supports data stability judgment, synchronous prompt
measurement condition, convenient for user to view.
When the reading method is smart measurement mode, the meter monitors
the balance condition, once balanced, it will automatically store
measurement results and end the measurement.
When the reading method is fixed interval timing measurement mode, the
meter monitors the timing measurement conditions, once satisfied,
automatically store the measurement results; and then repeated until reach
the set number of measurement, the measurement end.
When the reading method is a fixed time timing measurement mode, the
meter continuously monitoring, when reach to set time, the measurement is
finished (do not store measuring results).