MRC HT-3027SD, Руководство по эксплуатации

Страница: 10 / 26

3) Humidity / Temperature and Dew point and Wet bilb measurement
a. Plug the " Probe Plug " ( 3-17, Fig. 1 ) into the " Probe
Input Socket " ( 3-21, Fig. 1 ).
b. Power on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ).
c. Function select to " Humidity/Temp,Dew,Wet " measurement. ,
the LCD shows the unit " %RH " and " Temp." Dew " Wet "
℃
or
℉
" the at same time and measured value will show on the
display ( upper display is Humidity and Dew value, the lower
display is the temperature and Wet value ) .
Remark :
The meter Temp. display unit is defaulted to "
℃
".
If intend to let the meter's temperature unit default
to "
℉ " , then please refer chapter 7-7 ( page 20 ).
4) Type K/J thermometer and Humidity / Temperature measurement
a. Function select to " Type K/J thermometer "and" Humidity / Temp.
b. install the Humidity " Probe Plug " ( 3-17),into the " Probe
Input Socket " ( 3-21, Fig. 1 ).
c. Plug the Thermocouple Temp. Probe ( Type K Temp.
probe or Type J Temp. probe, optional ) into " Type
K/J Probe Input Socket " ( 3-20, Fig. 1 )
The Display will show the Type K orJ thermometer and
Humidity / Temperature measuring value .
d. If the Display show the indicator " K ", it is ready
for Type K thermometer.
If the Display show the indicator " J ", it is ready
for Type J thermometer.
Remark :
The meter is defaulted to " Type K thermometer ".
If intend to select the " Type J thermometer with
default , please refer chapter 7-8 ( page 20 ).
8