MRC CLRM-200, Руководство по эксплуатации

Страница: 23 / 33

18
Figure 22 Language Selection Interface
7. Display Mode
Select
“Display” in the main menu to enter an interface, as shown in Figure 23.
You can select different color spaces according to your need. This selection will
change the display in “Standard Measurement” and “Sample Measurement”
interfaces. You can make settin
gs by pressing “Up” and “Down” button. Then
press “Enter” to save the settings and return to the main menu.
Figure 23 Display Mode Interface
8. Average Measurement
Select “Average” in the main menu to enter an interface shown in Figure 24. You
can set the number of average measurements according to your need. You can
add or subtract the times by pressing “Up” and “Down” buttons. Press “Enter” to
save the settings and return to the main menu. When the number is set to “01”,
the instrument will only make single measurement, and will not perform average
measurement. The instrument is defaulted to one time measurement.
Figure 24 Average Measurement Setting Interface