22
save it,
you need to press and hold “Up/Print” button to print the measured
data after each measurement.
Figure 32 Print Setting Interface
d)
Select “Settings” - “Backlight Time” to enter an interface shown in Figure 33.
When the instrument is in idle state, you can set the backlight time to save
electricity consumption.
Figure 33 Backlight Time Setting Interface
e)
Select “Settings” - “Brightness Setting” to enter an interface shown in Figure
34. This interface is used to set the backlight brightness to help users to use
this instrument in different environments.
Содержание CLRM-200
Страница 29: ...24 Figure 36 Restore Factory Set ...