3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
Page 3
of 6 pages
Main Temperature Controller
This control is marked TEMP. CONTROL and consists of the digital display and UP and DOWN arrow pads for inputting set
point temperatures and calibration.
Number
Key
Description / Function
①
PV
To display process value, menu symbol and error code.
②
SV
To display set point value, parameter value or control output value.
③
For setting and calling up parameters.
④
To increase the value of digits.
⑤
To decrease the value of digits.
⑥
R
Revert /STOP/Restart Timer (For machine with timer use only)
⑦
C
Process Unit Indicator- Celsius
⑧
ALM
Indicator
Over-Heat Temperature.
Lights on when the set temperature is over 5
℃
, and turns off the
heater.
⑨
Output
Indicator
Control output lamp 1.
Light on when heater is activated
⑩
MAN
Lamp flashes during Manual Mode operates
○
11
COMM
Communication indicator
○
12
TUNE
Lamp flashes during auto-tuning operates
○
13
Lock indicator
○
14
MV&TIME
MV&TIME Indicator