3
GB
MOUNTING INSTRUCTIONS
DUCATI Hyperstrada 2013-
Thank you for buying a MRA Windshield.
Read this manual carefully and check the parts list for completeness before you begin. We recommend
that you have your screen fitted by an authorised workshop.
Number
Article
Article No..
Required tools
1
MRA screen
---
Allen key 3 & 4mm
2
Holding plates
10991
4
Domed screw M5x16
10554
4
Plastic washer
10635
4
Rubber Nut
10629
Fitting the screen to the motorcycle:
1. Stand your motorbike up on a level surface.
2. Undo the fastening screws and remove the original screen (P1).
3. You can attach the mounting plates using the original screws at three
different positions (P2 & P3).
4. Insert the rubber nuts into the holes (P2).
5. Position your MRA racing screen and fasten it to your bike using the oval-
head screws and washers.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
spirits to clean the screen as they will damage it.
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: [email protected]
