When do i select “Reverse State” ?
Mr12volt detects car CAN bus with most of the car models in the market,
however in some cases particularly in older generation cars, when CAN bus
can’t be detected, it is necessary to manually detect camera through car
reverse light signal.
(Refer to the AUDI MMI 3G Installation Diagram for more details )
“Starting front view” - Front camera timer setting with 5s, 10s, 30s
“Dedicated right view” - L/R Side camera setting (Blind Spot camera)
Can Active - Detects through CAN bus
12v Active - Detects through 12v side L/R light
“Reverse track” - Option to turn ON / OFF of a Parking Grid (For AfterMarket
camera only)
“Reverse radar” - Option to turn ON / OFF of a Reverse Sensor (For
AfterMarket Reverse sensor only)
