MR TAPMOTION TD ISM, Руководство по эксплуатации

Страница: 21 / 28

6 Operation
Maschinenfabrik Reinhausen GmbH 2016 21 4489615/01 EN TAPMOTION® TD ISM®
Operation
You can control the TAPMOTION® TD ISM® motor-drive unit's gear motor
using the OEM Control Box in two different operating modes:
▪
MANUAL: In MANUAL mode, the gear motor only runs as long as key 1
or N is pressed and held down. This allows you to move the gear motor
incrementally.
▪ AUTO: In AUTO operating mode, the gear motor runs until the on-load
tap-change operation is completely finished after pressing key 1 or N.
To activate the gear motor, proceed as follows:
1.
Move MANUAL/AUTO switch to the desired position to select the oper-
ating mode.
2. Press or press and hold key 1 or key N to activate the gear motor ac-
cording to the operating mode selected.
ð The gear motor runs. Then, if the gear motor is in a defined tap position,
the
In Position lamp lights up. Otherwise, the Error lamp lights up.
6