MR TAPMOTION TD ISM, Руководство по эксплуатации

Страница: 16 / 28

4 Packaging, transport and storage
Maschinenfabrik Reinhausen GmbH 2016 16 4489615/01 EN TAPMOTION® TD ISM®
Transportation, receipt and handling of shipments
WARNING
Danger of death and damage to property!
Danger of death and damage to property due to tipping or falling load!
► Transport crate only when closed.
► Do not remove the mounting material used in the crate during transport.
► Only trained and appointed persons may select the sling gear and se-
cure the load.
► Do not walk under the hanging load.
► Use means of transport and lifting gear with a sufficient carrying capaci-
ty in accordance with the weight stated on the delivery slip.
In addition to oscillation stress and shock stress, jolts must also be expected
during transportation. In order to prevent possible damage, avoid dropping,
tipping, knocking over and colliding with the product.
If a crate tips over, falls from a certain height (e.g. when slings tear) or expe-
riences an unbroken fall, damage must be expected regardless of the
weight.
Every delivered shipment must be checked for the following by the recipient
before acceptance (acknowledgment of receipt):
▪
Completeness based on the delivery slip
▪ External damage of any type.
The checks must take place after unloading when the crate or transport con-
tainer can be accessed from all sides.
If external transport damage is detected on receipt of the shipment, proceed
as follows:
▪
Immediately record the transport damage found in the shipping docu-
ments and have this countersigned by the carrier.
▪ In the event of severe damage, total loss or high damage costs, immedi-
ately notify the sales department at Maschinenfabrik Reinhausen and
the relevant insurance company.
▪ After identifying damage, do not modify the condition of the shipment
further and retain the packaging material until an inspection decision
has been made by the transport company or the insurance company.
▪ Record the details of the damage immediately onsite together with the
carrier involved. This is essential for any claim for damages!
▪ Photograph damage to packaging and packaged goods. This also ap-
plies to signs of corrosion on the packaged goods due to moisture inside
the packaging (rain, snow, condensation).
▪
NOTICE!
Be absolutely sure to also check the sealed packaging. If the
sealed packaging is damaged, do not under any circumstances install or
commission the packaged goods. Either dry the dried packaged goods
again as per the operating instructions for the relevant on-load tap-
4.2
Visible damage