5 Mounting
Maschinenfabrik Reinhausen GmbH 2020
33
1800138/08 EN
TAPMOTION
®
ED
Figure 14: Turning the hand crank in the opposite direction
7. Once the diverter switch operation begins, continue to turn in the same di-
rection while counting the tap-change indicator sections required for the
pointer to reach the mid-position of the area marked in gray on the tap-
change indicator. Note the number counted (value B) and the direction of
rotation (example: B=5).
Figure 15: Counting the tap-change indicator sections needed to reach the mid-position
8. If value B is greater than 8 tap-change indicator sections, the tap-change
operation has been completed correctly. If value B is less than 8 tap-
change indicator sections, turn another 8-B tap-change indicator sections
in the same direction (example: 8-5=3) to complete the tap-change opera-
tion. Then turn in the opposite direction until the pointer is in the mid-posi-
tion of the area marked in gray on the tap-change indicator.
