manualshive.com logo in svg

MR TAPMOTION ED 100-S/L, Руководство по эксплуатации

Поделиться
Скачать
MR TAPMOTION ED 100-S/L Скачать руководство пользователя страница 12

2 Security

Maschinenfabrik Reinhausen GmbH 2020

12

1800138/08 EN

TAPMOTION

®

 ED

Hand crank aperture

Reaching into the hand crank aperture during a tap-change operation may
lead to injuries caused by a rotating drive shaft.
▪ Never reach into the hand crank aperture.

Securing the motor-drive unit

If you open the motor-drive unit during operation, there is a danger of electric
shock due to live components behind the swing frame.
▪ Secure the motor-drive unit against unauthorized opening during opera-

tion by using a padlock.

▪ The motor-drive unit may only be opened by an electrically skilled person.

Opening the swing frame

Opening the swing frame while the motor-drive unit is in operation may result
in electric shocks due to live components.
▪ The swing frame may only be opened by an electrically skilled person.

Explosion protection

Highly flammable or explosive gases, vapors and dusts can cause serious
explosions and fire. This increases the danger to life and limb.
▪ Do not install, operate or perform maintenance work on the product in

areas where a risk of explosion is present.

Safety markings

Warning signs and safety information plates are safety markings on the
product. They are an important aspect of the safety concept.
▪ Observe all safety markings on the product.
▪ Make sure all safety markings on the product remain intact and legible.
▪ Replace safety markings that are damaged or missing.

Ambient conditions

To ensure reliable and safe operation, the product must only be operated
under the ambient conditions specified in the technical data.
▪ Observe the specified operating conditions and requirements for the in-

stallation location.

Содержание TAPMOTION ED 100-S/L

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды