mr. steam iTEMPO, Инструкция по установке, эксплуатации и обслуживанию, Страница: 26 / 34

Installation Section –
Installing the Linear Steam Head Steps
Linear Steam Head
CAUTION
Because direct steam
emission is very hot, Diverter will
become hot during steam session,
and will remain hot for a period of
time after steam session.
Diverter
The Linear steam head is
supplied with an optional diverter.
The diverter reduces the steam
emission zone. Always use the
diverter if any steam bather may
come into contact with direct steam
emissions. Please contact MrSteam
if a replacement diverter is required. Failure
to use a diverter to reduce the steam
emission zone as required to avoid contact
between a steam bather and direct steam
emissions may cause personal injury.
STEP 1.
Never install, remove or adjust a
diverter into the linear steam head when the
steam head is hot or if steam in turned on.
Installing, removing or adjusting a diverter
into the linear steam head when the steam
head is hot or if steam in turned on may
cause a burn hazard and personal injury.
7
®
®
NOTE: Drawings are for illustrative purposes only. Consult with qualified designer, architect or contractor for steam room construction.
Model 104480
6"-12"
Above Floor
Diverter
Steam Room
Interior
S TEAM
EMISSION
Figure 7
Diverter
Tile Tile
Tile Tile
Diverter