READ ME FIRST!
As you follow these instructions, you will notice
CAUTION
and
IMPORTANT NOTE
symbols. This information is
important for the proper, safe and trouble free installation of
the Linear Steam Head. These are types of potential hazards
that may occur if in-stallation instructions are not carefully
followed.
This signals a situation where injury or property damage may
occur if you do not follow instructions.
IMPORTANT NOTE:
This highlights information that is
espe-cially relevant to a problem-free installation.
All information in these instructions is based on the latest
informa-tion available at the time of publication. Sussman-
Automatic Corpo-ration reserves the right to make changes
at any time without notice.
100561-1 Rev 3.20.1
mr.steam
®
Sussman-Automatic Corp®
[email protected] www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM
Installation Section – Read Me First & Cautions
Linear Steam Head
1
®
®
Model 104480
PUR 103936 Rev 6.20
• Linear Steam Head model 104480 is suitable for MrSteam
generator models MS90 – MS400, MSSUPER1–
MSSUPER3, MX4 – MX6.
Do not use Linear Steam Head model 104480 for any
other MrSteam steam generator. Failure to follow these
instructions may result in a leak within the wall cavity and
cause problems associated with leaks, moisture and
property damage from leaks.
• Do not use the Linear Steam Head with any steam
generator that is not a MrSteam steam generator. Do not
locate the steam head in any location where the steam
emission zone is near a seat, bench or any space
occupied by any persons. Failure to follow these
instructions may result in a hazardous condition, scalding
or personal injury.
Using model 104480 for any steam generator model
larger than the MX6, or for any non MrSteam brand
generators may result in an improper installation or
hazardous condition.
• Do not use the Linear Steam Head with any NON-
MrSteam equipment or devices, including but not limited
to water softeners, steam generators, etc. Using the
Linear Steam Head with any NON-MrSteam equipment or
devices may result in personal injury or, Linear Steam
Head damage or property damage.
• MrSteam steam generators Models MX4, MX5 and MX6
require two 104480 steam heads. Failure to use two
steam heads may result in steam head operation where
incidental contact by the bather with direct steam
emission may occur. Do not locate the steam head in any
location where the steam emission zone is near a seat,
bench or any space occupied by any persons. Failure to
follow these instructions may result in a hazardous
condition, scalding or personal injury.
• Because the steam head and direct steam emission are
very hot, locate the steam head where incidental contact
by the user with the steam head or direct steam emission
cannot occur.
• Model 104480 Linear Steam Heads are for residential use
only. Do not use Model 104480 Linear Steam Heads for
commercial installations, Day Spa, or with commercial
steam generators. Using Model 104480 Linear Steam
Heads for commercial, Day Spa or installations with
commercial steam generators or any installation with
steam sessions exceeding 60 minutes a day, may result in
Linear Steam Head damage, property damage or
personal injury.
• Do not use any Linear Steam Head in any commercial
installation or with any commercial steam generator. Using
any Linear Steam Head in a commercial installation or
with any commercial steam generator may result in Linear
Steam Head damage, property damage or personal injury.
• Install in orientation shown in fig 2 only. Installation in any
other orientation may concentrate the steam and result in
excessive temperature. Failure to install in correct
orientation may result in steam head operation where
incidental contact by the bather with direction steam
emission may occur. Failure to follow these instructions
may result in a hazardous condition, scaling or personal
injury.
• Insulate the steam head and piping as required to reduce
temperature within the wall cavity. Do not locate the
steam head or plumbing near any materials, including
wiring, devices, or products that may be adversely
affected by elevated temperatures. Check with the
manufacturer of construction materials and products to for
suitability for operation at elevated temperatures. Failure
to follow these instructions may result in the failure of
materials, including wiring, devices, or products.