mr
.
steam
®
*/45"--"5*0/01&3"5*0/"/%."*/5&/"/$&
"VEJP4UFBN
®
Figure 6
Figure 8
Foam block
inserts
All drawings are for illustrative purposes only.
*/45
"--&3
Figure 7
Power
Cord
Auxiliary and
FM Outputs
Speaker and
Subwoofer
Outputs
Communication
Port
7
AudioSteam3
®
3. Connecting AudioSteam3
• To reduce the risk of electric shock, do not remove the
screws on the back of AudioSteam3. No user-
serviceable parts inside. Refer servicing to qualified
service personnel.
• To prevent electric shock, do not connect
AudioSteam3 to main power supply while the cover is
removed.
• AudioSteam3 does not come with speakers and
speaker wiring. The connection between AudioSteam3
and the speakers must be “Class 2 Wiring” and
installed by quali-fied personnel.
Removing the AudioSteam3 Cover
To remove the AudioSteam3 cover:
1. Using a Phillips-head screwdriver, remove the two cover screws from
the front of the AudioSteam3
(Figure 6)
, and remove the cover from
the unit.
2. Connect the outputs of AudioSteam3 as shown in
Figure 7
.
3. Remove the two foam block inserts from the inner wiring channels
and set aside (
Figure 8
).
Connecting AudioSteam3
To connect AudioSteam3 to the steam generator,
per-form one or more of the following connections:
• Connect the FM antenna (included) and auxiliary
cord to AudioSteam3.
• Connect speakers and subwoofer to
AudioSteam3 with speaker wire.
• Connect AudioSteam3 to the steam genera-tor’s
motherboard or daughter board with the
AudioSteam3 control cord.
• Pair a Bluetooth-enabled device to
AudioSteam3.